Видео

Just wanted to add my thanks for creating this video. Got my 2018-spec Serie 8 opened this weekend and got the condensers cleaned without a hitch! It's nice having HOT and DRY clothes come out of the dryer once again.

Thank you so much for helping so many of us. My water sensing pressure pipe came off and the machine is fixed. Thank you

Do you have a video for a samsung front load washer that wont go on?

What if there's just cold water

Wow , great video

Great Video! Where do I find the ntc temperature Sensor?

Hey, is it also possible to not only turn the machine on but also start a cycle like for towels and also switch the temperature? Do you know what's the command for that?

Great video, my washing machine don't move the error FE of the control painel, so How much does this concert cost?

F.

Thanks you ❤

You saved me $270 with a two minute solder job, Thank you.

My washer is the one on the right. It turned on for a second when i spun the drum. What is the fix for this??

Do you need to remove the water in the tank after every time you use the dryer

❤

Hi thanks I like your video. I need your help to trace my lg machine. My machine when I start any cycle drain moor start .. not stoping till i stop ofter one minute motor stop.please tell me whate to be problem. Thanks in advance

I cannot spin the drum fast enough because it still has water in it. Can I use a vom and check the fuse?

on checking for power from the box, I swap the dryer and washer plugs.

You’re a legend for doing this - fixed it myself I reckon I saved myself at least $300 in call out costs

Thank you so much!!!! Had code -23 on my Bosch series 8, after watching your video my husband was able to fix the issue and the second load is nearly done! You are brilliant!!!

Doesn’t look easy.

Thank you from Australia 🇦🇺 we were able to fix the error thanks to you. Cheers mate.

Very easy to follow. Well done for sharing this step by step video + great commentary along the way

I tried percussive maintenance and it worked

Fixed it, thank you. I think that the problem may be caused by pushing the washing machine firmly into place using pressure on the control panel caused the buttons to dislodge.

Hi done everything you’ve done and all the parts are in good condition. Dryer making the turn sound just not spinning do you know what it is

Thank you so much! Well explained

LG must learn the German Technology

thx. it helped me

Hi, I can’t get the screws off the bottom plate. Could I do a video consult with you? I’m in NSW. I think the plate is soldered on

My Samsung washing machine wins spelling.The displacement board gush off and freezes down goes off

Thank you in deed. Salut from Türkiye.

Thank you very much for this 🍺🍺

I'm struggling to use it.

HI. Does someone know what the part (relay) number is?

Hey man thanks so much for making this video. This kind of insight is hugely appreciated and I’m really grateful you took the time to make it. Mine is still not showing any signs of life, is there a control board or something that might have bit the dust? It died half way through a wash and efforts to resuscitate aren’t coming to mind. Any idea? Thanks again for the content man!

Thanks so much for a useful video. It was the same issue with my dryer, causing intermittent the EH0 error. Dry/cracked solder joints on the back of the relays. Thankfully I had just enough knowledge and the right tools to fix this in about half an hour.

I have had my LG for years. All of a sudden, it is not spinning my clothes dry on 800 rpm. I then have to do a rinse and spin to dry my clothes enough to hang on the line

Nobody has really explained the number of rinses. To wash you dose washing powder and a rinse liquid to the proper place in the drawer. Then how this Samsung machine applies multiple rinse - is the FIRST rinse consuming the rinse liquid (fabric softener)? And then this first rinse finishes and the second rinse starts (hey, no more fabric softener in the drawer, right?) so it uses only water for the second rinse (so technically removes the fabric softener from your clothes), and then the second rinse finishes and the third rinse starts (yeah, again no softener in the drawer) so your clothes are water-rinsed again, and with fourth and fifth rinse the same, so finally you were an idiot using the fabric softener at all? Or PERHAPS it applies all rinses BUT the "last one" with the water flowing through the washing powder compartment in the drawer, and ONLY applies water through the softener compartment so the fabric softener is only applied during the very last rinse? This is totally not clear. And this is an extremely important information regarding the product

Nobody has really explained the number of rinses. To wash you dose washing powder and a rinse liquid to the proper place in the drawer. Then how this Samsung machine applies multiple rinse - is the FIRST rinse consuming the rinse liquid (fabric softener)? And then this first rinse finishes and the second rinse starts (hey, no more fabric softener in the drawer, right?) so it uses only water for the second rinse (so technically removes the fabric softener from your clothes), and then the second rinse finishes and the third rinse starts (yeah, again no softener in the drawer) so your clothes are water-rinsed again, and with fourth and fifth rinse the same, so finally you were an idiot using the fabric softener at all? Or PERHAPS it applies all rinses BUT the "last one" with the water flowing through the washing powder compartment in the drawer, and ONLY applies water through the softener compartment so the fabric softener is only applied during the very last rinse? This is totally not clear

Thank you, it works!

ciao errore E09-00 che cosa può essere? grazie

This genuinely should be on LG website lol. Thank you

Last bosch I buy

Does that machine have a 10 year warranty sticker on the top right corner? Seriously bad optics.

I'm also sending you many thanks for putting up this video and for making it easy! Fixed it with the $25 part and I'm up to my third load done today! Hope you have a great week!

Thanks Mr Washy Washy, this fixed my problem. I have an Electrolux Ultimate Care 800 wash & dry model that has already required fixing once by a technician. The technician used crimp sleeves to rejoin the wires, and zip-tied the wire to the original anchor point (it failed again after a dozen wash cycles). I tried a crimp sleeve but the wires are a little too thin for a good join, I recommend soldering as Mr Washy Washy does. And definitely attach the wires to main loom and not the dryer manifold, that manifold shakes a lot!

Thank you so much for showing us how fix this machine!

Followed your video, found the problem, replaced the parts and it is running like new. Thanks a lot 🎉

Excellent Video, specially the comment to keep trying the reset a few times

Thanks for the video. I had to change the display. It came loose like a good tape. No heating necessary.